| Lamphead: |
| |
| |
| Optical System: |
Soft Diffusion Panel |
| |
| Light Aperture: |
645 x 300 mm / (25.4 x 11.8 inches) |
| |
| Beam Angle: |
110 (Half Peak Angle) |
| |
| Weight: |
Manual Version: 12 kg (26.5 lbs) |
| |
Pole Op Version: 13 kg (28.7 lbs) |
| |
| Handling: |
Steel Yoke, High Strength Tilt Lock, Pole Operation Option (Pan & Tilt) |
| |
| Mounting: |
28 mm Spigot (Junior Pin) |
| |
| Tilt Angle: |
+/- 90 |
| |
| Lamphead Voltage Input: |
48 V DC |
| |
| Power Consumption: |
420 W Nominal, 450 W Maximum |
| |
| Lamphead Power Connection: |
Male 3-Pin XLR - 15 amp (Pin 1: Negative / Pin 2: Positive) |
| |
| Battery Connector: |
Male 4-Pin XLR - 10 Amp (Pin 1: Negative / Pin 4: Positive) |
| |
| Battery DC Voltage Range: |
23 - 36 V DC |
| |
| Battery Mode Light Output: |
50% of Total Output |
| |
| White Light: |
2,800K - 10,000K Continuously Variable Correlated Color Temperature |
| |
| Coloured Light: |
Full RBG+W Color Gamut with Hue and Saturation Control |
| |
| Colour Temperature Tolerance: |
+/- 100 K (nominal), +/- 1/8 Green-Magenta (nominal) |
| |
| Colour Rendition: |
CRI Average Greater 95 |
| |
TLCI Average Greater 90 |
| |
| Green-Magenta Adjustment: |
Continuously Adjustable (Full Minusgreen to Full Plusgreen) |
| |
| Dimming: |
0 - 100% Continuous |
| |
| Control: |
On-Board Controller, 5-Pin DMX In and Through, |
| |
EtherCon LAN Network Connectivity, USB-A |
| |
| Remote Device Management (RDM): |
DMX Setup, Hour Counter and Standard RDM Commands |
| |
| USB Interface: |
DMX Setup, Fixture Status and Firmware Upgrade Through PC, Mac and USB Stick |
| |
| Housing Colour: |
Blue/Silver, Black |
| |
| Ambient Temperature Operation: |
-20 to +45 C (-4 to +113 F) |
| |
| Protection Class: |
IP 20 |
| |
| Estimated LED Lifetime (L70): |
50,000 hours |
| |
| Estimated Colour Shift Over Lifetime: |
Less than 200 K |
| |
| Certifications (pending): |
CE, FCC; GS, cNRTL, CB |
| |
| |
| Power Supply Unit: |
| |
| |
| Power Supply Input Range: |
90 - 250 V AC, 50 - 60 Hz |
| |
| Power Supply Output Range: |
48 V DC |
| |
| Power Input Connection: |
powerCON TRUE1 (Bare Ends / Schuko / Edison Cables Available) |
| |
| Power Output Connection: |
Female 3-Pin XLR - 10 Amp (Pin 1: Negative / Pin 2: Positive) |
| |
powerCON TRUE1 (mains power through) |
| |
| Weight: |
5 kg (11 lbs.) |
| |
| Control: |
On-Board On/Off Switch |
| |
| Mounting: |
Super Clamp Attachement / SkyPanel PSU Rail Mount |